Motion edit prompt

Use the static SVG unchanged as the starting state. Keep the medal centered. Rotate the scalloped rosette behind the circular center clockwise around its own center through a half-turn during the first part of the motion, while the circular center stays put and keeps facing forward; it does not turn with the rosette. At the same time, pivot the ribbon pieces from their top attachment points so each completes three alternating swings, reaching about ten degrees away from its angle in the provided SVG on each swing: the left and right side ribbons swing clockwise first, then reverse counterclockwise past neutral, swing clockwise again, and settle at their angles in the provided SVG; the center hanging ribbon swings in the opposite phase, counterclockwise first, then clockwise, then counterclockwise, and settles. After the rotations settle, scale the entire medal assembly uniformly down around the center to about 90% of its size, then scale it back up with ease-out until it settles at its size in the provided SVG.