Motion edit prompt

Use the static SVG as the frame-0 starting state, with no edits needed. Keep the van in place with the wheel centers fixed. After a brief still hold, rotate both wheels counterclockwise rapidly around their own centers for 12 full turns, easing into the spin and then stopping cleanly at their angles in the provided SVG. At the same time the wheel spin begins, animate the van body as a separate group above the wheels: first give it a small clockwise tilt around a pivot on the lower center between the wheels so the front lifts and the rear dips, then rotate it back level. While the wheels continue spinning, and starting immediately after the initial tilt peak while the body is rotating back level, make the body bounce vertically on its suspension in three down-then-up bounces, compressing toward the wheels first and returning to its normal height each time. Near the end, while the wheels are still spinning, make a smaller opposite tilt so the front dips and the rear lifts, then settle the body back to its starting level position before the wheel spin stops.