Motion edit prompt

Use the static SVG as the frame-0 starting state with no starting edits. Animate the charging case body as one group with a smooth vertical move downward by roughly one eighth of its own height at the start, hold it briefly in the lower position, then move it back up to where it sits in the provided SVG with ease-out and leave it still. At the same time, animate each earbud as a rigid unit, translating it while rotating it about its lower stem/socket area: the left earbud translates upward-left first by roughly half an earbud-head width and rotates counterclockwise about 20 degrees outward so its top leans left while its stem slants back toward the center; the right earbud mirrors this by translating upward-right by roughly half an earbud-head width and rotating clockwise about 20 degrees outward so its top leans right. Hold both earbuds in the raised, outward-tilted pose while the case remains lowered, then reverse the motion so the earbuds slide back down into the positions where they sit inside the case in the provided SVG and rotate back to their 0-degree upright angles in the provided SVG as the case returns upward. Keep all parts fully opaque with soft eased timing.