Motion edit prompt

Keep the top horizontal housing fixed. Treat the pose in the provided SVG as the settled lowered position of the camera: the lower narrow band and rounded camera body move together as one linked assembly. To set the starting state, this assembly sits about one lower-band height above that pose, with the lower band completely hidden behind the top housing; it then slides downward, overshoots slightly, and rebounds upward until it returns to where it sits in the provided SVG. While held lowered, the inner lens dot squashes vertically into a thin horizontal line once and expands back to a circle at its size in the provided SVG, like a quick blink. After the blink, the whole central lens ring and dot slide horizontally across the camera face, moving left first, pausing, then sweeping right past center, pausing, and returning to center; the small side dash details drift with this scan more subtly, reaching their largest leftward displacement at the lens's left pause, their largest rightward displacement at its right pause, and their smallest displacement when the lens returns to center. Near the end, the lowered assembly dips slightly as anticipation, then slides back upward under the top housing to the tucked position. Use smooth ease-in/ease-out motion with no rotation or fading.